CELEBRATING 130 YEARS NEW & SPECIALTY PRODUCTS PRODUCT LIST INTERACTIVE CATALOG CALCULATORS SUPPORT PRODUCT LITERATURE REQUEST INFO Ross Valve

Locations

Ross Technology Park / World Headquarters
The Ross Tech Park (RTP) is a 15.5 acre complex purchased in 2004, a mere 1.5 miles from our Oakwood Avenue facility. This expansion has allowed us to streamline our operations for improved efficiencies, and expand the business to keep up with growing customer demand. The facility currently is home to the following Ross Valve divisions:

  • Corporate Headquarters
  • Machining
  • Assembly
  • Hydro Testing
  • Shipping & Receiving

Correspondence:
  PO Box 595, Troy, NY 12181

Physical Address (Headquarters):
  79 102nd St., Suite 100, Troy, NY 12180

Physical Address (Shipping):
  75 102nd St., Troy, NY 12180

Telephone: 518.274.0961
Normal Hours: 8:00am to 5:00pm, weekdays
Directions

The Ross Tech Park also houses a cafe and several tenants, as well as our Troy Die Cutting facility.


Ross Valve at Oakwood Avenue
Our Oakwood Avenue facility has been our exclusive manufacturing facility from 1897 until 2004, when we first began shifting some operations to the Ross Tech Park in order to expand and improve efficiencies. The 35,000 square foot Oakwood Avenue facility currently is home to the following Ross Valve divisions:

  • Iron foundry     
  • Bronze foundry     
  • Pattern Shop     
  • Machining     
  • Assembly     
  • Hydro Testing     
  • Electronics     
  • Spare Parts

Correspondence: PO Box 595, Troy, NY 12181

Physical Address: 6 Oakwood Ave, Troy, NY 12180

Telephone: 518.274.0961
Normal Hours: 7:00am to 3:30pm, weekdays
Directions

Years of experience have shown that our rigid red brass control piping (minimum 1/2 inch diameter) can stand up to the decades of service expected of our valves.A visual position indicator gives an accurate assessment of valve position, which is invaluable in monitoring valve performance and troubleshooting.Our standard strainer to protect the controls from contaminants is actually functional - with over 7 square inches of surface area.Due to the long stroke inherent to our piston style design, we can optimize each valve's performance by tailoring the seat contour design to the valve's specified application.Each valve is built standard with ANSI Class 250 construction with regard to wall thickness, internal components, and controls. Flanges are sized and drilled as specified to mate with adjacent pipes and equipment.All ferrous surfaces are coated with two layers of NSF Certified Epoxy Coating inside and out.The rugged bottom cylinder ensures that the valve piston is fully guided above and below the seat to counter any lateral forces and ensure correct alignment at the seat.All control devices are built to meet our strict requirements for durability, in order to ensure a long service life of the entire valve assembly.Though every valve is tested at the factory prior to shipment, devices like the speed control valve may be adjusted in the field for further refinement, should operating conditions change.The Ross Piston Style design utilizes rugged seals that wear gradually and are not vulnerable to sudden failure or rupturing.Ross Valve | Automatic Control Valves for the Water and Wastewater Industries